| ADJUSTABLE SPREADERS |
 |
| |
| The CST spreaders are available for a variety of popular dinghy and skiff classes, suitable for 50-60mm mast ranges. |
| |
| This pruduct features adjustable arm angle allowing you to tune your rig to perfection. The spreader arms are made of carbon fibre elliptical sections attached to stainless steel mast collar. |
| |
| For more information including pricing on any of the below products E-mail Us or phone +61 2 9668 8488. |
| |
| Product Code |
Photo |
Description |
| CST-023-1 |
|
Adjustable carbon spreaders,
to suit 50 series mast |
| CST-023-2 |
|
Adjustable carbon spreaders,
to suit 60 series mast |
|
| |
| MAST HEAD & MAST PLUG FITTINGS |
|
| |
| CST
Composites manufacturer a variety of Mast Head
Fittings for the dinghy classes. These are Nylon machined and suit our standard range of sections. |
| |
| Product Code |
Photo |
Description |
| CST-110-1 |
|
Plastic Mast Head Fitting,
Suit 16mm ID |
| CST-110-2 |
|
Plastic Mast Head Fitting, Suit 19mm ID |
| CST-264-1 |
|
Plastic Mast Head Fitting,
Suit 17.1mm ID |
| CST-264-2 |
|
Plastic Mast Head Fitting,
Suit 18.5mm ID |
| CST-251 |
|
Moulded Carbon Mast Head Fitting, (Includes spinnaker and main halyard pulleys) |
| CST-029-1 |
|
Quick Release Mast Head Fitting, Suit 16mm ID |
| CST-029-2 |
|
Quick Release Mast Head Fitting, Suit 19mm ID |
| CST-310 |
|
Quick Release Mast Head Fitting, Suit 75mm ID Elliptical |
| CST-508 |
|
Plastic Heel Plug, Suit 30mm ID |
| CST-237 |
|
Plastic Heel Plug, Suit 35mm ID |
| CST-084-1 |
|
Plastic Heel Plug, Suit 40mm ID |
| CST-084-2 |
|
Plastic Heel Plug, Suit 45mm ID |
| CST-084-3 |
|
Plastic Heel Plug, Suit 54mm ID |
| CST-312 |
|
Carbon and Urathane Heel Plug, Suit 75mm ID Elliptical |
| CST-047-1 |
|
Plastic Heel Plug, Suit 63.5mm ID @4.5 Degrees |
| CST-047-2 |
|
Plastic Heel Plug, Suit 54mm ID @ 4.5 Degrees |
| CST-047-3 |
|
Plastic Heel Plug, Suit 54mm ID @ 6 Degrees |
| CST-047-4 |
|
Plastic Heel Plug, Suit 51.8mm ID @ 6 Degrees |
|
| |
| VANG, FORESTAY AND GOOSENECK FITTINGS |
|
| |
As listed in the table below, a range of epoxy/carbon moulded fittings is available to suit standard CST dinghy mast and boom sections. The fittings are made using our resin infusion technology to provide ultra light weight and strong parts.
We also offer a number of stainless steel gooseneck fittings that are used by most popular skiff and dinghy classes.
Please contact us to order or for more information.
|
| |
|
Photo: Stainless Steel Gooseneck Fittings |
| |
| Product Code |
Photo |
Description |
| CST-284 |
|
Moulded Carbon Vang Stopper Fitting (Suits 75 Series Booms) |
| CST-383 |
|
Moulded Carbon Vang Stopper Fitting (Suits 95 Series Booms) |
| CST-292 |
|
Moulded Carbon Mainsheet Bridle Holder (Suits75 Series Booms) |
| CST-293 |
|
Moulded Carbon Mainsheet Lug Fitting (Suits 95 Series Booms) |
| CST-294 |
|
Moulded Carbon Forestay Tang Fitting (Suits E75 Series Mast) |
| CST-568 |
 |
Moulded Carbon Goseneck Fitting (Suits 57mm ID Masts)
Riley stainless steel fitting is included |
| CST-266 |
|
Moulded Carbon Forestay Tang And Vang Fitting (Suits 30 and 35 Series Mast or 95 Series Booms) |
|
|
|
| |
